Background
TR | EN
Cementation

 Cementation LOW CARBON STEEL (C: % 0:10 to 0:25 ) EXTERNAL LAYER IS CARBON STEEL CONSTRUCTION MACHINERY after ENRICHMENT Carburize SO HARD AFTER THE LAYER OF CARBON RATIO of the ÇELİKLERDİR.SEMENT is around 0.8% .

IN ACCORDANCE WITH THE THICKNESS AND USES 0.1 to 3 mm DEPTH AL 59-67 HRC hardness DEĞİŞİR.SEMENTASYO TRANSACTIONS BETWEEN SOLID , LIQUID AND GAS TO MEDIA .

WATER ENVIRONMENT IS GENERALLY OIL, SALT AS 140 , PRIVATE WATER AND OIL BLEND is the HARD . MN alloying elements Cr Ni Mo and W KULLANILIR.180 ° C - 170 ° C SHALL APPLY TO MENEVİŞLENİR.ÖZEL hardened steel .

In BATHROOM HARDNER

BATH SALTS in the carburization ( Cementation )

1) Carburization thermomechanical pulping is an austenitic SOLID DIFFUSION IN BRIEF Download

2) BATH SALTS FOR Carburization As carbon donors in the OR K- Na- Cyanide salts are used as cyanide

3) DEK surface hardening depth of 1.5mm YE NaCN FOR OBTAINING AND ACTIVATE THE BATHROOMS HAVE BEEN USED

4) NITRATE CONTAINING THE BATHROOM WITH BATH AT THE SAME TIME at 200 C in STEEL USED martempering leminide

5) martempering BATH SALTS ARE MOVED TO QUANTITY OF STEEL PARTS -up carbon and oxygen in SALT MAY BE AMONG THE EXPLODING hazardous reactions

6) CARBON STEEL BY EMIL (C) and nitrogen (N ) QUANTITY AND BATH TEMPERATURE is a function of the amount of cyanide 7) after carburization PARTS DIRECT is cooled with water

8) In CYANIDE BATH WATER LATER PART DUE TO SURFACE HIGH CARBON low hardness can be found in their administration is BECAUSE THEY DO NOT ALLOW THIS TO austenite carburizing temperature should be kept at an optimum value

9) ALLOY STEEL IS GRANTED TO WATER HARDNESS KERBÜRİZASYO IMMEDIATELY AFTER THE MOST AWARDED WATER FALLS FOR THIS TWO-STAGE ( surface oxidation is prevented )

10) a hardness of 0.5 - 1.5mm VALUE IS VERY HIGH if desired carburizing temperature ( 900-925 C)

11) ECONOMICALLY 0.5 mm DEPTH FOR UP TO VERY HARD TO USE



27.12.2013 10:52:56
Online: 2 - Toplam: 173571